UPS 4×4.25“ label format, most UPS labels will now be formatted to fit within a 4 x 4.25” space on a 4 x 6“ label as well as supporting 4 x 4”, 4 x 6“ and 4 x 6.75”
BluJay Clippership will discontinue support for the Eltron Printer, it no longer supports UPS. [Eltron was acquired July 9, 1998 by Zebra Technologies and is incapable of supporting modern carrier font and barcode requirements.]
UPS Peak Surcharge downloadable object to automate handling of Peak surcharge values automatically.
Due to a change in UPS distribution methods the UPS Routing files and UPS WorldWide Validation Files will be in a combined into a new download object that contains many files that may not be updated as often. The new WWV Version D is not available in versions less than 23.1.0.000.
In order to maintain proper routing of UPS packages, shippers are required to upgrade to the BluJay Clippership version 23.1.0.000 or higher when it is available.
This release will support UPS Synchronized Delivery - UPS Synchronized Delivery ServiceTM allows UPS to hold packages (per a shipper account contract) in order to pair their delivery with other packages going to the same address. This service allows UPS to lower the amount of stops at a single address and also allows the shipper to receive a discounted rate.
The UPS Residential Charge will be broken out into a separate residential surcharge field, RES_CHG.
As a result of the UPS label format changes the Peripheral Engine has been changed to remove outdated drivers for legacy Eltron and other devices that are no longer believed to be in the field.
BluJay Clippership will temporarily discontinued support for the PNG Image Driver. If this driver was in use, please contact support to enter a ticket.
NOTE: Some of these features may be referenced in this help file, prior to availability in BluJay Clippership.