Differences

This shows you the differences between two versions of the page.

--- clippership:software-requisites [2025/01/03 15:47] – lseadmin
+++ clippership:software-requisites [2025/01/03 16:00] (current) – lseadmin
@@ Line 1: / Line 1: @@
 ====== Clippership Requisites Installer ======
 <bootnote>Clippership version 25.1.1 has been found to not auto-run its prerequisites check.\\ This installer will install known Clippership prerequisites.\\
-While designed for 25.1.1, it should work for any modern version of Clippership.\\
+While designed for 25.1.1, it should be compatible for any modern version of Clippership.\\
 \\
-**The link to download the installer is at the bottom of this page.**
+**The link to download the installer is at the bottom of this page.** </bootnote>
-</bootnote>
 This installer will install packages/libraries that are required to run Clippership. Normally, when running a new version of Clippership on a workstation, Clippership will check for these and prompt to install them if they are not detected.
@@ Line 21: / Line 21: @@
 ==== Download ====
+<bootnote warning>While the Clippership version update only needs to be run on one workstation, these prerequisites will need to be installed explicitly on every workstation!</bootnote>
 Download the installer here:
-[[clippership:support_files:cs-req_25.exe|Clippership Requisite Installer]]
+{{clippership:support_files:cs-req_25.exe|Clippership Requisite Installer}}