Differences

This shows you the differences between two versions of the page.

--- carriers:fedex:fsms:20.07 [2024/03/18 10:20] – lseadmin
+++ carriers:fedex:fsms:20.07 [2025/01/20 17:40] (current) – lseadmin
@@ Line 1: / Line 1: @@
-====== FedEx Ship Manager Server 20.07 ======
+=== FSMS 20.07 ===
-=== Clippership 23.3+ has been certified for use with FSMS version 20.07. ===
-The installer can be downloaded from here (not for Proship systems):
-[[https://www.fedex.com/us/developer/downloads/FSMSInstaller/2023/FedExShipManagerServer_20.07.exe|https://www.fedex.com/us/developer/downloads/FSMSInstaller/2023/FedExShipManagerServer_20.07.exe]]
-==== Supported Operating Systems ====
-  * Windows Server 2019 Datacenter
-  * Windows Server 2019 Standard
-  * Windows Server 2016 Datacenter
-  * Windows Server 2016 Standard  **(recommended)**
-  * Windows Server 2012 Standard **(recommended)**
-  * Windows Server 2012 R2 Standard
-  * Windows 10 Enterprise
-<bootnote>This version of FedEx Ship Manager Server is designed to work best on Windows Server 2012
-and higher. FedEx recommends that you
-upgrade to ensure your systems are not at risk.
-See the Microsoft website:
-https://www.microsoft.com/enus/windows/enterprise/end-of-support.aspx
-</bootnote>
-==== Hardware Requirements ====
-|                      ^ Minimum                ^ Recommended       ^ High Performance ^
-^ Processor            | Xeon E3 or E processor | Xeon E5 processor | Xeon E7 or Dual E3 or Dual E5 processor (fastest and most cores available) |
-^ Memory               | 8 GB ECC               | 12 GB ECC         | 20GB ECC |
-^ Hard drive           | 300 GB                 | 500 GB            | 1 TB SSD |
-^ Dedicated Cores (VM) | 2                      | 4                 | 8        |
-==== Installation Recommendations ====
-  * Before installing FSMS, the installer verifies if the applicable .Net Framework version 4.8 is installed on the system.
-    * If the .Net Framework version 4.8 is not present, the installer aborts the installation of FSMS and a parameterized error message "FedEx Ship Manager® Server requires that your system has the .Net Framework version 4.8 installed," is displayed before the installer is closed.
-  * If your server is currently on a domain, remove it from the domain prior to the installation process.
-    * After the installation, you can add it back to the domain. By doing so, you can also eliminate other variables that could cause issues during the installation process.
-    * //This is the FedEx recommendation. LSE has done FSMS installations successfully without removing the server from the domain.//
-  * Ensure that the server has a local Windows Administrator account for installing and running the FSMS application.
-    * Typically, a local administrator named FEDEXUSER is created. But any username can be used.
-    * Ideally, the password should be set to not expire
-    * You should be logged in with this user when running the installation.
-    * The installation wizard will prompt for the password for this user, which will be used when configuring the services.
-      * Most FedEx services will be configured to "run as" this user.
-      * If the password changes, then each of the FedEx services will need to be updated with the new password.
-  * Have a valid product key
-    * Product key for 20.07 (expires Feb 28, 2025): 77RQS36MKY54Z4F3
-  * Know your FedEx Compatible Solution Program Type code
-    * The FedEx CSP code for Clippership is 014
+Moved to: [[carriers:fedex:fsms:fsms-requirements|]]